We install what we sell
Not a reseller passing you to a contractor. We are the authorized Luminey distributor and Itel / Traness dealer, and our own team mounts, wires and commissions every system. One number to call when something needs looking at.
Authorized Luminey Distributor
Built cell by cell.
Engineered part by part for Pakistan's heat, dust and load-shedding — then built the same way on your roof.
Then it runs your building
One panel.
Twenty-five years of free sunlight.
- 0+
- Systems installed
- up to 0%
- Lower monthly bill
- 0 yr
- Panel warranty
We supply and install Luminey, Itel / Traness, Jinko Solar, Longi, Canadian Solar, JA Solar, Trina Solar.
Why Solar Lines
Solar is easy to sell. Hard to do properly.
Net metering, handled
We file the paperwork, coordinate the meter change and get you exporting. Most customers stop dreading the bill within one cycle.
Built for load-shedding
Hybrid systems with battery backup, so the lights stay on when the grid does not.
5 kW to 1 MW
Homes, shops, factories and tube wells. The same engineering at every scale.
AMC & cleaning
Dust costs you output. Annual maintenance contracts keep the array producing.
Free · No details needed
What would solar actually save you?
Move the slider to your current monthly bill. You'll get the system size you need, what you'd stop paying, and how long it takes to pay for itself.
Rs
Type it, or drag the slider. Between Rs 3,000 and Rs 1,000,000.
Recommended system
5 kW
About 9 panels of 585W, plus a 5kW inverter. On-grid with net metering.
You'd save / month
Rs 26,400
Pays for itself in
2.5 yrs
Saved over 25 yrs
Rs 71 lakh
How we worked this out
- Tariff assumed at Rs 55 per unit (kWh), all-in.
- Each 1 kW generates about 126 units a month in Pakistan's sunlight.
- Installed cost taken as Rs 160,000 per kW, on-grid.
- Net metering offsets about 88% of the bill — fixed charges, taxes and night-time draw stay.
- These are estimates for guidance only, not a quotation. Your real figures depend on your roof, shading, tariff slab and the equipment you choose.
How it works
Sunlight in. Bill out.
Four steps, and only one of them involves you doing anything.
Sunlight hits the panels
Monocrystalline cells on your roof turn daylight into DC electricity — no moving parts, no fuel, no noise.
The inverter converts it
A Luminey hybrid inverter turns DC into the 220V AC your house actually runs on, and decides in real time what to power first.
Your building uses it first
Everything running during daylight — ACs, motors, pumps, freezers — runs on sunlight instead of grid units you pay for.
The surplus goes back
Extra units export to the grid through your net meter and count against your bill. With batteries, the surplus charges them first.
Sunlight hits the panels
Monocrystalline cells on your roof turn daylight into DC electricity — no moving parts, no fuel, no noise.
The inverter converts it
A Luminey hybrid inverter turns DC into the 220V AC your house actually runs on, and decides in real time what to power first.
Your building uses it first
Everything running during daylight — ACs, motors, pumps, freezers — runs on sunlight instead of grid units you pay for.
The surplus goes back
Extra units export to the grid through your net meter and count against your bill. With batteries, the surplus charges them first.
Packages
Pick a size. See what's in it.
Family home
10 kW
Complete on-grid or hybrid system: panels, inverter, mounting structure, protections, cabling, installation and net-metering paperwork.
Panels
18
tier-1, 585W class
Inverter
10kW
Luminey hybrid
Battery option
10 kWh
Luminey Elecra / Monawall
Prices move with the dollar and with panel supply, so we quote live rather than publishing a number that's wrong by next week.
Get today's price for this sizeSolutions
Three ways to do this.
The right one depends on how much load-shedding you're willing to tolerate.
On-Grid
Lowest cost, biggest saving
Tied to the grid with net metering. No batteries, so nothing to replace — but it switches off during load-shedding.
Best for: Homes and businesses with reliable supply
Hybrid
What most people should buy
Net metering plus battery backup. Saves like on-grid, and keeps running through outages. Our most-installed system.
Best for: Anywhere load-shedding is a fact of life
Off-Grid
Independent of the grid entirely
Panels, batteries and inverter only. For sites where there is no grid connection worth having.
Best for: Farms, tube wells, remote sites
- 0+
- Systems commissioned
- 0
- Cities covered
- 0 MW
- Capacity installed
- 0 yr
- Panel warranty
Projects
Installed and running.
10 kW
Residential rooftop
Lahore
250 kW
Textile unit array
Faisalabad
75 kW
Retail plaza
Karachi
15 kW
Tube well conversion
Multan
Customers
What they said afterwards.
Bill went from just under fifty thousand to under six. The team finished the 10 kW system in two days and handled the net metering file themselves.
Homeowner
DHA Phase 5, Lahore · 10 kW hybrid
We run three shifts. The array covers the daylight load completely, so our diesel hours have basically disappeared.
Factory manager
Faisalabad · 250 kW on-grid
They came back twice for cleaning without me chasing them. That is the part I did not expect.
Shop owner
Gulberg, Lahore · 15 kW
Reviews are illustrative placeholders pending the owner's real, attributed customer feedback.
Questions
The things everyone asks.
How much does a solar system cost in Pakistan?
It depends on size and whether you want batteries. As a rough guide, budget around Rs 1.5–1.8 lakh per kW installed for an on-grid system, and more for hybrid with storage. Use the calculator above for a size estimate, then message us for a real quote on your roof.
What is net metering, and do you handle it?
Net metering lets you export surplus units to the grid and offset them against what you import, so your bill drops to a fraction of what it was. Yes — we prepare and file the application, coordinate the bidirectional meter installation, and see it through to approval.
Will solar keep my house running during load-shedding?
Only if you have a hybrid or off-grid system with batteries. A pure on-grid system shuts down when the grid goes down, by design and by regulation. If backup matters to you, hybrid is the system to buy.
How long does installation take?
A typical 5–15 kW residential system is mounted, wired and commissioned in two to three days once the equipment is on site. Commercial and industrial installations are scheduled around your operations.
What maintenance does a solar system need?
Very little mechanically, but panels lose real output to dust — which matters a lot here. We offer cleaning and annual maintenance contracts that include panel washing, connection checks, inverter diagnostics and performance reporting.
Which brands do you supply?
We are the authorized distributor for Luminey inverters and battery storage, and a dealer for Itel / Traness energy products. For panels we supply tier-1 brands including Jinko, Longi, Canadian Solar, JA Solar and Trina.
Free estimate · No obligation
Send us your last bill. We'll do the rest.
One photo of your electricity bill on WhatsApp is enough for us to size a system and quote it properly.